China valve motor Manufacturers Factory Suppliers
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
Two-way Rubber Sealed Butterfly ValveRead More
Two-way rubber sealed butterfly valve has a two-way sealing function, good sealing performance, and can achieve zero leakage in both positive and negative directions.
-
Pipeline Ball ValveRead More
The company's pipeline ball valves mainly include three series: forged steel three-piece trunnion ball valve, cast steel three-piece trunnion ball valve and fully welded trunnion ball valve.
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Three Way Control ValveRead More
The Three-way control valve is mainly used for the inlet and outlet of steel mill filter, as a valve for controlling the flow direction of filtered water and backwash water.
-
Hydraulic Control Check Butterfly ValveRead More
DH7cs41 hydraulic control check butterfly valve is an intelligent product developed with great concentration for the purpose of eliminating water hammer and protecting the safety of water pumps and
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Multifunctional Slow Closing Check ValveRead More
Multifunctional slow closing check valve is a multifunctional (slow-closing) check valve with power unit and air travel coupler, and electric/manual valve opening, valve closing, and short-time
-
Rubber Sealed Gate ValveRead More
Rubber Sealed Gate Valve utilizes the deformation compensation effect of the overall rubber covering of the gate to achieve a good sealing effect, and overcomes the phenomenon of poor sealing,
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Stainless Steel Flat GateRead More
The stainless steel plate gate is mainly suitable for urban sewage treatment and water treatment systems of waterworks, used to cut off water flow and adjust flow.
WebMotor-Driven Flow-Adjustment Valve Actuators. Automatically start, stop, and adjust flow through valves. Choose from our selection of motor-driven valves, including over 90...
WebJul 23, 2023 · A motor operated valve (MOV) works with the help of an electric motor to open and close the valve. This motor is connected to the valve’s stem, and when it’s...
WebKeep me updated. Motorized control valves ensure perfect control and efficiency for every building and application. Danfoss Motorized Control Valves (MCV) for district heating and cooling, HVAC...
WebValve Type: Butterfly. For Use With: Oil, Natural Gas, Propane, Butane, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Kerosene. Seal Material: Viton® Fluoroelastomer Rubber. Specifications...
WebMay 23, 2023 · All valves manufactured by us are certified. Contact us to learn more about our products. Motor-operated valves are used to control the flow of liquids and gases in a variety of...
WebThe motor operated valves (MOV) is an important element of the plant and pipe system. These valves are generally large and are used for different applications such as pump discharge, etc. The...



