China valve pump Manufacturers Factory Suppliers
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
Two-way Rubber Sealed Butterfly ValveRead More
Two-way rubber sealed butterfly valve has a two-way sealing function, good sealing performance, and can achieve zero leakage in both positive and negative directions.
-
DIN Butterfly ValveRead More
DIN butterfly valve has good sealing performance and has a two-way sealing function, and both positive and negative directions can achieve zero leakage.
-
Water Turbine Inlet Hydraulic Ball ValveRead More
The entire equipment of this product includes upstream extension pipe, water inlet hydraulic ball valve, water inlet valve expansion device, bypass pipeline, bypass pipeline control valve, bypass
-
Water Turbine Inlet Hydraulic Butterfly ValveRead More
The whole equipment of this product includes upstream extension pipe, water inlet hydraulic butterfly valve, water inlet valve expander, downstream extension pipe, bypass pipe, bypass pipe control
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Multifunctional Slow Closing Check ValveRead More
Multifunctional slow closing check valve is a multifunctional (slow-closing) check valve with power unit and air travel coupler, and electric/manual valve opening, valve closing, and short-time
-
Electric Knife Gate ValveRead More
Knife gate valves are available in two forms: concealed stem and exposed stem. The fully circular direct-flow channel is designed without slag or jamming.
-
Butterfly GearboxRead More
The worm gear box series is a reduction mechanism designed for valves with a 90° range of opening and closing.
-
Eccentric Plug ValveRead More
Eccentric plug valve is widely used in petrochemical, steel, electric power, municipal construction and other pipelines to regulate flow and intercept flow.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.



