+86-13503541205

Slip On Flange

What is Slip On Flange

 

Slip-on flanges, also known as ‘hubbed flanges’, have a hub with a very low profile. This type of flange is usually connected to a pipe by one or two fillet welds, it is however possible to use only a single weld. A slip-on flange’s bore size is larger than that of the connecting pipe, which allows it to slide/slip onto the pipe. There is no full penetration weld between the pipe and the flange, thus there are limitations for its usage due to lower weld integrity. Slip-on flanges are produced in many sizes and favoured for lower pressure applications.

Benefits of Slip On Flange

Ease Of Installation

The slip-on design enables effortless mounting to the end of a pipe or fitting without intricate alignment procedures. This saves time and effort during installation, especially when many flanges are involved.

 

 

 

Has cost -effective

The design of slip on flange is relatively simple, resulting in less manufacturing complexity and lower production costs than other types. This affordability makes them ideal, especially for projects with budget constraints. Furthermore, the reduced welding material results in cost savings on consumables like welding rods or wires.

Versatility

They are conveniently accessible in various sizes, materials, and pressure ratings, simplifying the search for the ideal flange that meets specific needs. Moreover, they exhibit compatibility with diverse types of pipes and fittings, allowing for versatility in their usage. This compatibility extends to various materials including carbon, steel, and alloy materials enabling seamless integration with different systems.

Space Efficiency

Slip on flange have a compact and streamlined design. They have a flat face, unlike weld neck or socket weld flanges with protruding necks or socket extensions. This design minimizes the overall footprint of the flange, allowing for more efficient use of space within the piping system. They also have a shorter length compared to other types.

 

Why Choose US

 

Our Company

Shanxi Sinomach Co., Ltd. an international industrial supplier focusing on the design, production, and sales of flanges, valves, and other pipe fittings. The factory covers an area of 24,500 m² and has many professional and technical personnel.

Our Products

We offer wind power tower flanges, pressure vessel flanges, petrochemical flanges, pipe flanges, natural gas flanges, power flanges, forged shafts, forged gears, valves, and more.

Our Service

Whether it is pre-sales consultation, sales, or after-sales support, we are available 24 hours a day to answer customers' questions and provide fast and effective solutions until our customers are satisfied.

Production Market

Our products are exported to the United States, the United Kingdom, France, Germany, and other countries.

Types of Slip On Flange
ANSI Reducing Flange

Lap Joint Slip On Flange

This type of flange is used in conjunction with a stub end fitting. The stub end slides into the flange, allowing for easy alignment and adjustment.

 
ANSI Plate Flange

Ring Type Joint Slip On Flange

This type of flange is used in high-pressure applications. It has a ring-shaped groove on the face of the flange that holds a metal gasket for optimal sealing.

 
ANSI Blind Flange

Raised Face Slip On Flange

There is a small portion extruded from the bottom face of the slip on flange, this type is raised face slip on flange. The function of this area is to place a gasket seat during installation to get a better sealing performance. As the pressure ratings bigger, the height of this raised face will be bigger.

 
DIN Slip On Flange

Rtj Slip On Flange

A small grooved is machined on the raised face part, this form is called RTJ type, the function of this groove is to place the gasket ring, also applied for sealing, compared to RF type, RTJ is designed for high pressure use.

Material of Slip On Flange

 

 

Flanges are a set of mechanical devices necessary to join different components together without using a welded joint but only by means of screws and bolts.In addition, the use of screws allows the components to be kept separate from each other, avoiding, in the event of nucleation and growth of a crack, that it develops without any type of interruption between one component and another.They are conventionally manufactured from carbon steel, stainless steel, and aluminum alloys with distinct features that influence their viability for diverse sorts of pipelines or installations based on factors like temperature range and corrosion resistance levels.

How the Slip On Flange works

 

A slip-on flange has a flat face and a raised boss on the inside of the bore. The flange is slipped onto a pipe and welded on both sides to provide sufficient strength and prevent leakage. The raised boss on the inside of the flange allows for proper alignment of the two pipes and provides additional support. The slip-on flange is commonly used in low-pressure applications where alignment is critical, and bolting the flange onto the pipe is not required.They are useful when the flow is directed from the smaller size to the larger size. Slip-On flanges are welded internally and externally. The welding offers them the ability to prevent leakage and sufficient strength.

Application of Slip On Flange
1

Oil an dustry

Slip on flanges are commonly used in the oil and gas industry to connect pipes, valves, and other equipment in pipelines.

2

Chemical industry

Slip on flanges are also widely used in the chemical industry to connect pipes that transport chemicals and other hazardous substances.

3

Water treatment plants

Slip on flanges are used in water treatment plants to connect pipes and other equipment in the water supply system.

4

Power plants

Slip on flanges are commonly used in power plants to connect pipes and equipment in the cooling water system, steam turbines, and other areas.

How to maintain Slip On Flange

Regular checks and maintenance

Regular maintenance is essential to ensure slip-on flanges continue to perform optimally. Slip On Flanges should be wiped down regularly to remove any accumulation of dirt and debris. This will prevent damage to the flange's surface over time.

Check the wear

Regular inspection of the flanges is important to detect any signs of wear or damage. Signs of wear and tear may include corrosion, damage to the sealing surface, and loose bolts. Identifying and addressing these issues promptly is crucial for system reliability.

DIN Plate Flange
JIS Blind Flange

Lubrication

Lubricating the Slip On Flange can help reduce friction and prevent wear and tear. Use a lubricant that is appropriate for your specific flange type.

Tightening

Ensure the bolts are tightened to the correct torque specifications. Loose bolts can result in leaks, while over-tightening can cause damage to the flanges.

How to Use Slip on Flange

The slip on flange is a type of flange that is designed to slip over the end of a pipe and then be welded in place.

 

Measure the outside diameter of the pipe that the slip on flange will be used on. Ensure that the flange you are using is the correct size for the pipe.

 

Clean the edge of the pipe to ensure that it is free from debris and contaminants, which could affect the weld quality.

 

Slide the slip on flange over the end of the pipe and ensure that it is centered properly. The flange should rest on the pipe's shoulder, which is a raised portion of the pipe that provides a stop for the flange.

 

Tack weld the flange to the pipe in several places. This will hold the flange in place while you make the final welds.

 

Weld the flange to the pipe fully. Use the desired welding process and make sure to follow all safety precautions.

 

Inspect the weld to ensure it is of proper quality. Look for any signs of porosity or cracking, which may indicate a problem with the weld.

 

Clean the weld of any debris and contaminants.

 
How to Install Slip on Flange
 

Installing a slip-on flange is a straightforward process that requires a few essential tools and a basic understanding of the necessary steps.

01/

Prepare the Pipes

Before installing the slip-on flange, ensure that the end of the pipe is clean and free from burrs, debris, or rough surfaces.

02/

Align the Flange

Once the pipes are ready, align the slip-on flange onto the pipe. Make sure that the bolt holes on the flange match those on the pipe.

03/

Insert Gasket

Insert a gasket between the flange faces. This gasket ensures a secure seal between the pipe and the flange.

04/

Position the Bolts

Position the bolts through the bolt holes on the flange and into the bolt holes on the pipe.

05/

Tighten the Bolts

Hand-tighten the nuts onto the bolts. Then, use a wrench to tighten each nut, alternating between bolts and nuts across the flange. Do not overtighten the bolts or it could damage the gasket.

06/

Inspect the Connection

Once the bolts are tight, inspect the connection between the slip-on flange and the pipe. Make sure the flange is securely fastened to the pipe and that there are no gaps or leaks.

Things to Note When Using Slip on Flange

 

Slip on flanges are a popular type of flange used in various industrial applications that require a secure and leak-proof connection between pipes or valves. However, there are some important things to keep in mind when using slip on flanges to ensure that they function as intended and prevent potential issues.

 

Proper Alignment

The slip on flange must be aligned with the pipe or valve to which it is being connected. Proper alignment is essential to ensure a tight seal and prevent leakage. It is recommended to use alignment pins or guides to make sure the flange is centered properly.

 

Tightening Bolts

Make sure to tighten the bolts evenly to avoid any deformation or warping of the flange. Do not over-tighten as this can cause damage to the flange or the connecting pipe. Additionally, ensure that the bolts are tightened in the correct sequence to maintain even pressure.

 

Gasket Selection

Selecting the correct gasket material for the application is crucial in preventing leaks and ensuring a secure connection. The gasket must be compatible with the flange and the fluid or gas being transported.

 

Proper Installation

The slip on flange must be installed with the proper angle and orientation. The flange face should be flush with the mating surface to prevent any gap that can lead to leakage. It is important to ensure that the flange is not twisted during installation, which can cause the bolts to loosen over time.

 

Maintenance

Regular maintenance is essential to ensure the slip on flange remains in good condition and functions as intended. Inspect the flange and bolts periodically for any signs of wear or damage. Replace the gasket when necessary.

 
Components of Slip On Flange

Slip on flange, also known as SO flange, is a type of flange that slips over the end of a piping system and is then welded in place. It has the advantage of easier alignment and installation compared to other types of flanges.


Flange Face

This is the area where the flange comes into contact with the gasket and the mating flange. The flange face can be raised face (RF), flat face (FF), or ring type joint (RTJ).

 

Flange Bore

This is the inside diameter of the slip on flange that matches the outside diameter of the pipe. The flange bore is generally sized based on the pipe diameter.

 

Hub

This is the raised portion of the flange that connects to the pipe. It provides additional material for welding and helps to distribute the load of the flange evenly across the pipe.

 

Backing Ring

This is a separate piece that is fitted onto the hub of the slip on flange. It helps to provide additional strength and support to the flange, especially in high pressure applications.

 

Bolt Holes

These are the holes through which bolts are inserted to connect the slip on flange to the mating flange.

 

Weld Bevel

This is the angled edge on the hub of the slip on flange that facilitates the welding process.

 

Slip on flanges are commonly used in low pressure applications such as water and gas supply systems, where easy installation and alignment are important. They are also suitable for applications where frequent dismantling and maintenance are required.

 
Certificate

 

productcate-1600-500

 

 
Factory
 
Shanxi Sinomach Co., Ltd. is an industrial international supplier focusing on the design, production and sales of flanges, valves and other pipe fittings.
 
productcate-750-500
productcate-750-404
productcate-750-500
productcate-750-496
FAQ

Q: What is a slip on flange used for?

A: They are mainly used for fluids at low pressure or with little risk of leakage. It is very common to find these flanges today in cooling water lines, firefighting water lines, low-pressure compressed air lines, and process lines for substances such as steam, oil, gas, condensates, etc.

Q: What is the difference between a lap flange and a slip on flange?

A: Lap joint flanges are very similar to a slip-on flange, with the main difference being that it has a curved radius at the bore and face to house a lap joint stub-end. Lap joint flanges and stub-end assemblies are typically used in situations where frequent dismantling is required for for inspection.

Q: What is the strength of a slip on flange?

A: The strength for internal pressure of Slip On Flange is two-thirds of Weld Neck Flange. Durability life is 1/3 of WN flange. 2 fillet welding required for SO flange, one inside and one outside of flange.

Q: How far does a slip on flange go?

A: "The slip-on flange is positioned so the inserted end of the pipe or fitting is set back or short of the flange face by the thickness of the pipe wall plus 1/8 of an inch.

Q: What materials are used in slip on flanges?

A: The Slip On pipe flanges include materials carbon steel slip-on pipe flanges, stainless steel slip on pipe flanges and alloy steel slip on pipe flanges available in various class such as 150 LBS, 300 LBS, 600 LBS, 900 LBS. These flanges are ideal for low pressure applications.

Q: Applications of slip-on flanges?

A: They are mainly used for fluids at low pressure or with little risk of leakage. It is very common to find these flanges today in cooling water lines, firefighting water lines, low-pressure compressed air lines, and process lines for substances such as steam, oil, gas, condensates, etc.

Q: What are slip on flanges?

A: Slip on flanges are a popular type of pipe flange designed to accept pipe into the bore/center of the flange for welding around both the Outer Diameter (OD) of the pipe and on the interior side of the connection.

Q: What is the difference between slip on and SW flange?

A: Socket welded flange shape is similar to slip on flange, differently it has a shoulder at the inner bore. Slip On Flange - No shoulder at inner bore. Socket weld flange static strength is equal to slip on flange, but it's fatigue strength is 50% higher than the double welded slip on flange.

Q: Why is it called a slip on flange?

A: Slip-on (SO) flanges are a type of flange that has a flat face on the sealing surface and are typically used in low-pressure applications. They are called “slip-on” because they can be easily slipped onto the end of a pipe or fitting and then welded in place.

Q: What is the difference between weld on and slip on flanges?

A: The Weld Neck Flange offers increased strength under higher pressures, subzero or elevated temperatures that cause line expansion or retraction or other variable forces. The Slip On Flange is connected to the pipe by two welds, one on the back side of the Flange and one on the inside of the Flange.

Q: How does a slip flange work?

A: Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter. The OD of slip on flange is also welded on the back side of the flange.

Q: What is slip on flange terminology?

A: Slip-on flanges, also known as 'hubbed flanges', have a hub with a very low profile. This type of flange is usually connected to a pipe by one or two fillet welds (one outside the flange and one inside the flange), it is however possible to use only a single weld.

Q: What is the hub of a slip on flange?

A: A slip-on hub flange has an additional structure called “hub” in order to bear higher pressure. The slip-on hub flange is often used for higher pressure and/or larger diameter pipes than the slip-on flange without the hub.

Q: What is the difference between socket flange and slip on flange?

A: Socket welded flange shape is similar to slip on flange, differently it has a shoulder at the inner bore. Slip On Flange - No shoulder at inner bore. Socket weld flange static strength is equal to slip on flange, but it's fatigue strength is 50% higher than the double welded slip on flange.

Q: What is the welding gap for a slip on flange?

A: For welding Neck and Lap Joint Stub and Flange applications an initial root gap spacing between pipe and flange should be 1/16” to 1/8”. The first bead must penetrate uniformly to the inside wall of the assembly thus assuring a strong joint.

Q: Is a slip on flange considered a socket weld?

A: Socket weld flanges are designed for small nominal pipe sizes (≤ 4 inches, ≤ 10cm) and are common for ½ to 2-inch pipe sizes (1.3 to 5cm pipe sizes). The mechanical strength of a socket weld flange is similar to that of a slip-on flange, but the slip-on flange may use two welds.

Q: What are the restrictions of slip on flanges?

A: Limitations for slip-on flanges relate to: The use of two welds instead of one (usually). Reduced mechanical strength (welding neck flanges are 30% stronger. Unsuitability for cyclic loading.

Q: What is ASME standard slip on flange?

A: Slip On flanges according ASME B16. 5 are often used in installations, piping systems or in equipment construction to weld at the end of a pipe. can supply suitable Slip On flanges for every quality, pipe size and pressure class.

Q: What is slip on flange nomenclature?

A: Slip on flange also named as SO flange. SO flanges slip over pipes and are designed to bit slightly bigger on the inside than the pipe. They connect to the pipe through a fillet weld at the flange top and bottom.

Q: Do slip-on flanges require special tools for installation?

A: Slip-on flanges do not require special tools for installation. However, welding equipment will be needed to weld the flange in place.

As one of the leading slip on flange manufacturers and suppliers in China, we warmly welcome you to buy high-grade slip on flange for sale here from our factory. All our are with high quality and competitive price. For more information, contact us now.

, JIS Slip On Flange
Contact Supplier