+86-13503541205
Water Turbine Inlet Hydraulic Ball Valve

Water Turbine Inlet Hydraulic Ball Valve

The entire equipment of this product includes upstream extension pipe, water inlet hydraulic ball valve, water inlet valve expansion device, bypass pipeline, bypass pipeline control valve, bypass pipeline maintenance valve, air valve, etc. Ideal equipment for cutting or connecting media.

Send Inquiry
Add To Inquiry

Description

The entire equipment of this Water Turbine Inlet Hydraulic Ball Valve includes upstream extension pipe, water inlet hydraulic ball valve, water inlet valve expansion device, bypass pipeline, bypass pipeline control valve, bypass pipeline maintenance valve, air valve, etc. Ideal equipment for cutting or connecting media.

The main features of water turbine inlet hydraulic ball valve are as follows

1. The Water Turbine Inlet Hydraulic Ball Valve body and valve are made of high-quality carbon cast steel or alloy structural steel. The casting performance is superior, with sufficient rigidity and strength; after casting, the casting stress of the casting is eliminated by artificial aging treatment, and non-destructive testing is carried out. The valve body adopts a split type structure perpendicular to the axis of the valve shaft or an oblique split type structure at a certain angle with the valve shaft, connected by flange bolts, with strong bearing capacity, safety and reliability. The valve body is provided with feet connected with the foundation to transmit the vertical load of the valve to the concrete machine pier. The bottom of the valve body is provided with a sewage valve interface, which is convenient for cleaning the silt deposited in the valve chamber after long-term work; the valve adopts a cylindrical flow channel structure, full-bore design, and good hydraulic characteristics. The flow resistance coefficient of the water-hydraulic ball valve is about zero;

2. The main seal is designed as a double-sided seal structure for maintenance seals and work seals. The inspection seal is located on the upstream side of the hydraulic ball valve, and the working seal is located on the downstream side of the hydraulic ball valve. The inspection seal and the working seal water-stop ring move back and forth through the hydraulic control operating system, and contact with the ball crown fixed on the valve to form a seal. The sealing pair has no Friction stroke, long life, safe and reliable; the operating medium of the sealing water stop ring is the pressure water in the pressure steel pipe on the upstream side of the water inlet Water Turbine Inlet Hydraulic Ball Valve, and pressure oil can also be used as the operating medium of the sealing water stop ring; the sealing pair is made of stainless steel wear-resistant material, after Precision machined and ground assembly. The working seal and maintenance seal can be replaced without dismantling the valve body;

3. The Water Turbine Inlet Hydraulic Ball Valve shaft and valve adopt an assembled, welded, and integral casting structure, and anti-corrosion and anti-rust measures are taken for the rotating parts that cooperate with the bearing;

4. The shaft end seal adopts double seal, and there is a self-sealing structure at the inner end of the bearing to prevent the medium and impurities in the medium from entering the gap between the bearing and the valve shaft, reduce the wear of the bearing and the Water Turbine Inlet Hydraulic Ball Valve shaft, and maintain a good lubricating environment for the bearing. The opening and closing operation of the valve is stable, and the replacement of the shaft end seal does not need to dismantle the valve body;

 

Product Specification

Transmission

Method

Connection Type

Nominal Diameter

Dn (mm)

Pressure Range

PN (MPa)

Applicable Medium

Applicable Temperature ℃

Material

Hydraulic

Flange connection

650~2750

4.0~10.0

Water

-10 ~ +80
 

Excellent carbon steel, Bonded steel, Carbon steel + stainless steel, Stainless steel

Standard

JB/T9576、GB/T14478

 

Application

In order to ensure the safe and reliable operation of the turbine, the water inlet of the turbine is equipped with a water inlet ball valve, which is mainly used in hydropower stations and other industries.

application1

Hot Tags: water turbine inlet hydraulic ball valve, China, manufacturers, suppliers, factory, Pump Station Type Hydraulic Control Butterfly Valve, , , Hydropower Station Type Hydraulic Control Butterfly Valve, Water Turbine Inlet Hydraulic Ball Valve, Water Turbine Inlet Hydraulic Butterfly Valve

Contact Supplier