ANSI Orifice Flanges are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding neck , slip-on and screwed flanges except for the provision of radial, tapped holes in the flange ring for meter connections and additional bolts to act as jack screws to facilitate separating the flanges for inspection or replacement of the orifice plate.
Notes
1. JACK SCREW PROVISION
(1) Each ANSI Orifice Flange shall have a machine bolt mounted in a hole drilled on the flange centerline at 90 deg. From the pressure taps, for use as a jackscrew. Machine bolt shall be regular, with one heavy hex. nut.
(2) A slot shall be provided in the flange 0.06 in. (1.6mm) wider than the width across flats of the nut. The depth of the slot shall admit the nut so that there is no interference with the joining of the flanges when bolted together without orifice plate.
2. Tolerances on all dimensions shall be as shown in ANS B16.5 except for those shown below.
(1) Tolerance on location of center of pressure tap hole from flange face shall be :
a: Flanges smaller than nominal size 4 ± 0.02 in. (0.5mm)
b :Flanges nominal size 4 and larger ± 0.03 in. (0.8mm)
(2) Bore diameter tolerance (welding neck flanges only) is±0.5% of nominal value.
Product Parameters
|
Standard |
Nominal Diameter(mm) |
Pressure Class (LB/MPa/(kg/cm²) |
Material |
|
ASME B16.5,ANSI B16.5,ASME B16.47 |
DN15-DN3000 |
300,400,600,900,1500,2500 |
Carbon steel Stainless steel |
|
GB/T 9112~9124-2010 |
DN15-DN3000 |
PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 |
Carbon steel Stainless steel |
|
EN 1092 |
DN15-DN3000 |
PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160 |
Carbon steel Stainless steel |
|
BS 3293, 4504, 4505 |
DN15-DN3000 |
PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160 |
Carbon steel Stainless steel |
|
JIS |
DN15-DN500 |
5K, 10K, 16K, 20K |
Carbon steel Stainless steel |
|
Remarks: 1. For the details of this type of flange that you need, you can contact us at any time to provide you the better solution; 2. We have the ability to produce non-standard flanges according to the drawings provided by customers, and can also provide drawings and calculations of flanges according to the design parameters of the flanges. |
|||
Application
ANSI Orifice Flanges are widely used in electric power, oil and gas, petrochemical, chemical, shipbuilding, heating, papermaking, metallurgy and other industries

Package&Transport
In order to avoid product damage, we pack and transport products in strict accordance with international standards and the terms of the contract to ensure the safety of products during loading and unloading.

After-sales service
Our most fundamental purpose is to serve customers. If you have any quality problems with your products, please contact us in time so that we can provide you with suitable solutions
We provide comprehensive and timely after-sales service, no matter in terms of transportation, product quality, installation, etc., we will answer customers' questions 24 hours a day and provide effective solutions until customers are satisfied.

QA
Q1: Are you a supplier?
A1: Yes, we have cooperated with many international customers and have stable supply channels
Q2: Which shipping method do you take?
A2: Mainly by sea, but we will also look for other shipping methods according to customer needs.
Q3: Do you accept customized products?
A3: We accept all customized orders, just contact us and give me your design. We will provide you with a reasonable price and provide you with samples as soon as possible.
Q4: How to pay?
A4: 30% deposit in advance, 70% balance before shipment.
Q5: How long will it take to deliver the goods?
A5: It depends on the product and order quantity.
Hot Tags: ansi orifice flange, China, manufacturers, suppliers, factory, Orifice Flange,










