Generally, for larger shaft forgings, free forging will be used. A shaft is a cylindrical object that passes through the middle of a bearing, wheel, or gear, but there are also a few square shaped objects. Shaft forgings are Machine element that support rotating parts and rotate with them to transmit motion, torque or bending moment. Generally, it is in the shape of a metal circular rod, and each segment can have different diameters. The rotating parts in the machine are installed on the shaft.
The large shaft of the water turbine and generator operates under the action of bending and large torque. In addition to bearing huge centrifugal force, they also bear thermal stress, additional stress caused by rotational vibration, and impact during startup and shutdown. So large forgings such as large shafts and rotors require high strength, good plasticity, and toughness.
The material requirements are very strict, requiring uniform chemical composition, pure texture, and no large or dense inclusions, cracks, severe segregation and other defects. It is required that the residual stress after heat treatment is minimal.
Molten steel requires acidic open hearth or alkaline electric furnace smelting, requiring low oxygen, low hydrogen, and low sulfur and phosphorus. Require high content of elements such as Cr, Mo, and V.
After forging, several times of austenitizing heat treatment shall be carried out, followed by rough machining, quenching and tempering, and tempering shall be carried out on the premise of obtaining Martensite or Bainite. After semi precision machining, stress relief treatment should be carried out.
Shaft forgings are generally arranged with a upsetting process during the forging process:
1. Forgings have defects such as shrinkage, porosity, and segregation. A reasonable upsetting process can weld internal defects, reduce segregation, and meet technical requirements.
2. Due to mechanical performance requirements, the tangential performance of forgings with single elongation is not good. Repeated upsetting and drawing can improve the comprehensive mechanical performance. One is the forging ratio requirement, and different forging ratios have different mechanical properties. Generally speaking, larger forging ratios are beneficial for improving the performance of forgings, and the other is to break the tree branch structure in the casting state and refine the grains. Due to defects such as shrinkage and looseness in forgings, a reasonable upsetting process can weld internal defects to meet the requirements.
Jul 25, 2023
What is a shaft forging?
Previous
You Might Also Like
Send Message






