China valve opening drive Manufacturers Factory Suppliers
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Rubber Lined Butterfly ValveRead More
The rubber-lined butterfly valve is specially designed for use in pipelines with acid-base corrosive fluid media, and is used for intercepting or regulating flow.
-
Triple Eccentric Metal Hard Sealed Butterfly ValveRead More
The valve is a three-eccentric all-metal hard-sealed butterfly valve composed of the primary eccentricity formed by the center of rotation of the butterfly plate and the center of its sealing
-
Pump Station Type Hydraulic Control Butterfly ValveRead More
Pump station type hydraulic control butterfly valve adopts the heavy hammer energy storage structure commonly used in foreign advanced countries, and use the gravity to provide the valve closing
-
Water Turbine Inlet Hydraulic Butterfly ValveRead More
The whole equipment of this product includes upstream extension pipe, water inlet hydraulic butterfly valve, water inlet valve expander, downstream extension pipe, bypass pipe, bypass pipe control
-
Two-way Metal Hard Sealed Ball ValveRead More
Two-way metal hard sealed ball valve is widely used in gas, petroleum, chemical, thermal, papermaking, metallurgy, electric power and other departments where the medium contains particles and fibers
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Sleeve Control ValveRead More
Sleeve control valve provides a simple and easy solution for flow control and pressure control applications. Compared with similar products, its stroke is longer, so it can realize the best control
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Inclined Seat Slow Closing Check ValveRead More
Inclined seat hard sealed slow closing check valve is a new type of anti-hammer product with inclined valve seat, double offset butterfly plate, metal hard seal pair, flow-passing element with guide
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.



