China valve key motor Manufacturers Factory Suppliers
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Vacuum Butterfly ValveRead More
The vacuum butterfly valve is a new type of high -performance butterfly valve. Depending on the driver's device, it is divided into electric vacuum butterfly valve and manual vacuum butterfly valve.
-
AWWA Butterfly ValveRead More
The AWWA butterfly valve adopts a double eccentric and a special inclined cone elliptical sealing structure, which solves the problem that the sealing surface of the traditional eccentric butterfly
-
Two-way Rubber Sealed Butterfly ValveRead More
Two-way rubber sealed butterfly valve has a two-way sealing function, good sealing performance, and can achieve zero leakage in both positive and negative directions.
-
Triple Eccentric Metal Hard Sealed Butterfly ValveRead More
The valve is a three-eccentric all-metal hard-sealed butterfly valve composed of the primary eccentricity formed by the center of rotation of the butterfly plate and the center of its sealing
-
Water Turbine Inlet Hydraulic Butterfly ValveRead More
The whole equipment of this product includes upstream extension pipe, water inlet hydraulic butterfly valve, water inlet valve expander, downstream extension pipe, bypass pipe, bypass pipe control
-
Sleeve Control ValveRead More
Sleeve control valve provides a simple and easy solution for flow control and pressure control applications. Compared with similar products, its stroke is longer, so it can realize the best control
-
Hydraulic Control Check Butterfly ValveRead More
DH7cs41 hydraulic control check butterfly valve is an intelligent product developed with great concentration for the purpose of eliminating water hammer and protecting the safety of water pumps and
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Multifunctional Slow Closing Check ValveRead More
Multifunctional slow closing check valve is a multifunctional (slow-closing) check valve with power unit and air travel coupler, and electric/manual valve opening, valve closing, and short-time
-
High Temperature Integral Forged Steel Gate ValveRead More
High temperature and high pressure integral forged steel gate valve is an integral forged valve body, a pressure self-sealing bonnet, a lifting valve stem, a wedge-type elastic gate, and a bracket
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.



