China valve handle Manufacturers Factory Suppliers
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
Rubber Lined Butterfly ValveRead More
The rubber-lined butterfly valve is specially designed for use in pipelines with acid-base corrosive fluid media, and is used for intercepting or regulating flow.
-
DIN Butterfly ValveRead More
DIN butterfly valve has good sealing performance and has a two-way sealing function, and both positive and negative directions can achieve zero leakage.
-
Triple Eccentric Metal Hard Sealed Butterfly ValveRead More
The valve is a three-eccentric all-metal hard-sealed butterfly valve composed of the primary eccentricity formed by the center of rotation of the butterfly plate and the center of its sealing
-
Hydropower Station Type Hydraulic Control Butterfly ValveRead More
Hydropower station type hydraulic control butterfly valve is widely used in the inlet of water turbines in medium and small hydropower stations.
-
Pump Station Type Hydraulic Control Butterfly ValveRead More
Pump station type hydraulic control butterfly valve adopts the heavy hammer energy storage structure commonly used in foreign advanced countries, and use the gravity to provide the valve closing
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Steam Flow Control ValveRead More
The steam flow control valve is a regulating valve, which adopts a single-stage small-hole sleeve throttle cover, and the throttle area is changed by moving the valve core up and down, so as to
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Stainless Steel Flat GateRead More
The stainless steel plate gate is mainly suitable for urban sewage treatment and water treatment systems of waterworks, used to cut off water flow and adjust flow.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.



