China valve generator Manufacturers Factory Suppliers
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.
-
Fluorine Sealed Butterfly ValveRead More
The fluorine-sealed butterfly valve can be applied to harsh working conditions, and can be used to cut off or adjust the flow of medium on the pipeline.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
DIN Butterfly ValveRead More
DIN butterfly valve has good sealing performance and has a two-way sealing function, and both positive and negative directions can achieve zero leakage.
-
Water Turbine Inlet Hydraulic Ball ValveRead More
The entire equipment of this product includes upstream extension pipe, water inlet hydraulic ball valve, water inlet valve expansion device, bypass pipeline, bypass pipeline control valve, bypass
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Three Way Control ValveRead More
The Three-way control valve is mainly used for the inlet and outlet of steel mill filter, as a valve for controlling the flow direction of filtered water and backwash water.
-
Hydraulic Control Check Butterfly ValveRead More
DH7cs41 hydraulic control check butterfly valve is an intelligent product developed with great concentration for the purpose of eliminating water hammer and protecting the safety of water pumps and
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Multifunctional Slow Closing Check ValveRead More
Multifunctional slow closing check valve is a multifunctional (slow-closing) check valve with power unit and air travel coupler, and electric/manual valve opening, valve closing, and short-time
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.



