China valve fitting drive Manufacturers Factory Suppliers
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Fluorine Sealed Butterfly ValveRead More
The fluorine-sealed butterfly valve can be applied to harsh working conditions, and can be used to cut off or adjust the flow of medium on the pipeline.
-
AWWA Butterfly ValveRead More
The AWWA butterfly valve adopts a double eccentric and a special inclined cone elliptical sealing structure, which solves the problem that the sealing surface of the traditional eccentric butterfly
-
Water Turbine Inlet Hydraulic Ball ValveRead More
The entire equipment of this product includes upstream extension pipe, water inlet hydraulic ball valve, water inlet valve expansion device, bypass pipeline, bypass pipeline control valve, bypass
-
Water Turbine Inlet Hydraulic Butterfly ValveRead More
The whole equipment of this product includes upstream extension pipe, water inlet hydraulic butterfly valve, water inlet valve expander, downstream extension pipe, bypass pipe, bypass pipe control
-
Two-way Metal Hard Sealed Ball ValveRead More
Two-way metal hard sealed ball valve is widely used in gas, petroleum, chemical, thermal, papermaking, metallurgy, electric power and other departments where the medium contains particles and fibers
-
Eccentric Half Ball ValveRead More
Eccentric half ball valve has five pressure levels ranging from 0.6Mpa to 4.0Mpa, and the specifications range from DN100 to DN2400mm.
-
Steam Flow Control ValveRead More
The steam flow control valve is a regulating valve, which adopts a single-stage small-hole sleeve throttle cover, and the throttle area is changed by moving the valve core up and down, so as to
-
Inclined Seat Slow Closing Check ValveRead More
Inclined seat hard sealed slow closing check valve is a new type of anti-hammer product with inclined valve seat, double offset butterfly plate, metal hard seal pair, flow-passing element with guide
-
Rubber Sealed Gate ValveRead More
Rubber Sealed Gate Valve utilizes the deformation compensation effect of the overall rubber covering of the gate to achieve a good sealing effect, and overcomes the phenomenon of poor sealing,
-
Stainless Steel Flat GateRead More
The stainless steel plate gate is mainly suitable for urban sewage treatment and water treatment systems of waterworks, used to cut off water flow and adjust flow.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.



