China en blind flange Manufacturers Factory Suppliers
-
![DIN Blind Flange]()
DIN Blind FlangeRead MoreDIN blind flange is a flange without a hole in the middle, which is used to seal the pipe plug. The function is the same as that of welding head and threaded cap, except that the blind flange and
-
![JIS Slip On Flange]()
JIS Slip On FlangeRead MoreJIS slip-on flange is a connector on an industrial pipeline. The standard is JIS. It is an essential accessory for the interconnection between pipe ends.
-
![ANSI Welding Neck Flange]()
ANSI Welding Neck FlangeRead More$ 150.00
Welding neck flange is a flange with a neck and a round pipe transition that is connected to the pipe by butt welding.
-
![ANSI Long Welding Neck Flange]()
ANSI Long Welding Neck FlangeRead MoreThe neck of the long welding neck flange is a straight pipe instead of a tapered reducer. Among the common flanges, its structural strength is the best.
-
![ANSI Threaded Flange]()
ANSI Threaded FlangeRead More$ 160.00
A threaded Flange is also known as a screwed flange, and it has a thread inside the flange bore, which fits on the pipe with a matching male thread on the pipe. This type of joint connection is
-
![ANSI Blind Flange]()
ANSI Blind FlangeRead More$ 180.00
Blind flange is a flange cover without a hole in the middle, which is used to seal the pipeline. Its function is the same as that of the pipe cap. The blind flange seal is a detachable sealing device.
-
![GB Blind Flange]()
GB Blind FlangeRead MoreGB EN BS blind flange blind flange is a flange cover without a hole in the middle, which is used to seal the pipeline. Its function is the same as that of the pipe cap. The blind flange seal is a
-
![JIS Blind Flange]()
JIS Blind FlangeRead MoreJIS blind flange is a flange without a hole in the middle, which is used to block the pipe opening.
-
![ANSI Orifice Flange]()
ANSI Orifice FlangeRead More$ 150.00
ANSI GB EN BS JIS orifice flange are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases.
-
![ANSI Plate Flange]()
ANSI Plate FlangeRead More$ 140.00
The ANSI plate flange is to open several fixing holes on the periphery of a disc-like metal body for connecting other things.
-
![DIN Plate Flange]()
DIN Plate FlangeRead MoreThe DIN GB EN BS JIS plate flange is to open several fixing holes on the periphery of a disc-like metal body for connecting other things.
-
![Wind Tower Flange]()
Wind Tower FlangeRead MoreThe wind tower flange is a structural member connecting each section of the tower or between the tower and the hub, and between the hub and the blades, and is usually connected by bolts.
Scotty Waters
Mark Tucker
Dayna Davis
Travis Berrios
Herman Kendall
Rosie Goodman
A blind flange is a solid disk used to block off a pipeline or to create a stop. Similar to a regular flange, a blind flange has mounting holes around the perimeter and the gasket sealing rings are...
Aug 12, 2019 · The simplest, most straight-forward flange in design, a blind flange is a solid disk used to block the end of a pipe. It’s anomalous in that most flanges are open in the center,...
EN 1092-1 TYPE 05 PN 6 BLIND FLANGE EN 1092-1 TYPE 05 PN 10 BLIND FLANGE EN 1092-1 TYPE 05 PN 16 BLIND FLANGE EN 1092-1 TYPE 05 PN 25 BLIND FLANGE. Weld neck...
Sep 20, 2017 · Blind flange dimensions class 300, 400, 600, 900, 1500, 2500 up to 24 inch (ASME B16.5) with stud bolts requirements (#bolts, diameter) ... Prev Previous Blind Flange Dimensions EN...
A blind flange is a solid steel piece with no bore (interior diameter) and primarily designed to cap off a line....
A blind flange is a solid disk used to block off a pipeline or to create a stop. It is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket...