The valves have a wide range of uses and various types, and the difficulty of valve classification is also increasing. In order to better understand the valve products, Duoyi Company specially classifies the common valves. The types of valves are classified according to the actual working conditions on the site. Some of them are selected by the manufacturers themselves, and different uses and working principles are different under special circumstances. In general, it can be divided into two categories:
The first type of automatic valve is the valve that acts by itself depending on the capacity of the medium (liquid and gas). Such as check valve, safety valve, regulating valve, drain valve, pressure reducing valve, etc.
The second type of drive valve: valves operated by manual, electric, hydraulic and pneumatic means, such as butterfly valve, ball valve, gate valve, stop valve, throttle valve, plug valve, etc.
At present, the most commonly used valve classification methods at home and abroad are as follows:
1、 According to the structural characteristics and the moving direction of the closing part relative to the valve seat, it can be divided into:
1. Truncated gate: the closing part moves along the center of the valve seat
2. Gate shape: the closing piece moves along the vertical valve seat center.
3. Cock and ball: the closing part is a plunger or ball, which rotates around its centerline.
4. Swing shape; The closing member rotates around the shaft outside the valve seat.
5. Disc: the disc of the closing part rotates around the axis in the valve seat.
6. Spool type: the closing part slides in the direction perpendicular to the channel.
2、 According to the driving mode, it can be divided into:
1. Electric: driven by electric motor or other electrical devices.
2. Hydraulic: driven by (water, oil).
3. Pneumatic; Use compressed air to drive the valve to open and close.
4. Manual: with the help of handwheel, handle, lever or sprocket, it is driven by manpower. When driving large torque, it is equipped with worm gear, gear and other reduction devices.
3、 According to the purpose, the valve can be divided into:
1. Disconnection: used to connect or cut off pipeline medium, such as globe valve, gate valve, ball valve, butterfly valve, etc.
2. Check valve: used to prevent medium backflow, such as check valve.
3. Regulation: used to regulate the pressure and flow of medium, such as regulating valve and pressure reducing valve.
4. Distribution: used to change the flow direction of media and distribute media, such as three-way cock, distribution valve, slide valve, etc.
5. Safety valve: when the medium pressure exceeds the specified value, it is used to discharge excess medium to ensure the safety of pipeline system and equipment, such as safety valve and emergency valve.
6. Other special uses: such as drain valve, vent valve, blowdown valve, etc.
Jan 23, 2023
How Many Types Of Valves Are There?
You Might Also Like
Send Message









