China valve repair drive Manufacturers Factory Suppliers
-
Butterfly GearboxRead More
The worm gear box series is a reduction mechanism designed for valves with a 90° range of opening and closing.
-
Fluorine Sealed Butterfly ValveRead More
The fluorine-sealed butterfly valve can be applied to harsh working conditions, and can be used to cut off or adjust the flow of medium on the pipeline.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
AWWA Butterfly ValveRead More
The AWWA butterfly valve adopts a double eccentric and a special inclined cone elliptical sealing structure, which solves the problem that the sealing surface of the traditional eccentric butterfly
-
Pump Station Type Hydraulic Control Butterfly ValveRead More
Pump station type hydraulic control butterfly valve adopts the heavy hammer energy storage structure commonly used in foreign advanced countries, and use the gravity to provide the valve closing
-
Steam Flow Control ValveRead More
The steam flow control valve is a regulating valve, which adopts a single-stage small-hole sleeve throttle cover, and the throttle area is changed by moving the valve core up and down, so as to
-
High Temperature Integral Forged Steel Gate ValveRead More
High temperature and high pressure integral forged steel gate valve is an integral forged valve body, a pressure self-sealing bonnet, a lifting valve stem, a wedge-type elastic gate, and a bracket
-
Electric Knife Gate ValveRead More
Knife gate valves are available in two forms: concealed stem and exposed stem. The fully circular direct-flow channel is designed without slag or jamming.
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Stainless Steel Flat GateRead More
The stainless steel plate gate is mainly suitable for urban sewage treatment and water treatment systems of waterworks, used to cut off water flow and adjust flow.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.



