China valve durability Manufacturers Factory Suppliers
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
AWWA Butterfly ValveRead More
The AWWA butterfly valve adopts a double eccentric and a special inclined cone elliptical sealing structure, which solves the problem that the sealing surface of the traditional eccentric butterfly
-
Rubber Lined Butterfly ValveRead More
The rubber-lined butterfly valve is specially designed for use in pipelines with acid-base corrosive fluid media, and is used for intercepting or regulating flow.
-
Triple Eccentric Metal Hard Sealed Butterfly ValveRead More
The valve is a three-eccentric all-metal hard-sealed butterfly valve composed of the primary eccentricity formed by the center of rotation of the butterfly plate and the center of its sealing
-
Sleeve Control ValveRead More
Sleeve control valve provides a simple and easy solution for flow control and pressure control applications. Compared with similar products, its stroke is longer, so it can realize the best control
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Multifunctional Slow Closing Check ValveRead More
Multifunctional slow closing check valve is a multifunctional (slow-closing) check valve with power unit and air travel coupler, and electric/manual valve opening, valve closing, and short-time
-
Electric Knife Gate ValveRead More
Knife gate valves are available in two forms: concealed stem and exposed stem. The fully circular direct-flow channel is designed without slag or jamming.
-
Butterfly GearboxRead More
The worm gear box series is a reduction mechanism designed for valves with a 90° range of opening and closing.
-
Stainless Steel Flat GateRead More
The stainless steel plate gate is mainly suitable for urban sewage treatment and water treatment systems of waterworks, used to cut off water flow and adjust flow.
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.



