China shut off valve Manufacturers Factory Suppliers
-
Full Pressure High Speed Exhaust ValveRead More
QSPl.0 (1.6, 2.5, 4.0) type full-pressure high-speed exhaust valve, installed on water pipelines below 1.0 (1.6, 2.5, 4.0) MPa, water temperature lower than 80 ℃.
-
Ventilation Butterfly ValveRead More
Due to different working conditions, the ventilation butterfly valve can be divided into two structural forms: single-axis and multi-axis (louver).
-
Hydraulic Control Ball ValveRead More
For hydropower stations (or pumped storage power stations) with water heads higher than 300m, hydraulic control ball valves are generally used as turbine inlet valves and installed at the inlet of
-
Two-way Metal Hard Sealed Ball ValveRead More
Two-way metal hard sealed ball valve is widely used in gas, petroleum, chemical, thermal, papermaking, metallurgy, electric power and other departments where the medium contains particles and fibers
-
Steam Flow Control ValveRead More
The steam flow control valve is a regulating valve, which adopts a single-stage small-hole sleeve throttle cover, and the throttle area is changed by moving the valve core up and down, so as to
-
Three Way Control ValveRead More
The Three-way control valve is mainly used for the inlet and outlet of steel mill filter, as a valve for controlling the flow direction of filtered water and backwash water.
-
Hydraulic Control Check Butterfly ValveRead More
DH7cs41 hydraulic control check butterfly valve is an intelligent product developed with great concentration for the purpose of eliminating water hammer and protecting the safety of water pumps and
-
Extraction Check ValveRead More
The strength and sealing performance of the extraction check valve fully meet the design and manufacturing acceptance standards, and the valve in a vacuum state is subjected to a vacuum test, and the
-
Electric Knife Gate ValveRead More
Knife gate valves are available in two forms: concealed stem and exposed stem. The fully circular direct-flow channel is designed without slag or jamming.
-
Hydrostatic Test ValveRead More
Hydrostatic test valve is installed on the outlet of the boiler superheater and the inlet and outlet steam pipes of the reheater.
-
Eccentric Plug ValveRead More
Eccentric plug valve is widely used in petrochemical, steel, electric power, municipal construction and other pipelines to regulate flow and intercept flow.
-
Flange Adaptor and Dismantling JointRead More
DSJ type multifunctional telescopic joint, easy to install and disassemble, can automatically adjust the axial displacement of the pipeline under temperature difference.



