As a DIN Plate Flange supplier, I often get asked about the differences between raised face and flat face DIN Plate Flanges. These two types of flanges are commonly used in various industries, and understanding their distinctions is crucial for making the right choice in your piping systems. So, let's dive right in and explore what sets them apart.
What are DIN Plate Flanges?
First off, let's briefly talk about DIN Plate Flange. DIN, which stands for Deutsches Institut für Normung, is the German Institute for Standardization. DIN Plate Flanges are designed and manufactured according to the standards set by this institute. They are used to connect pipes, valves, and other equipment in a piping system. These flanges are popular because of their standardized dimensions, which ensure compatibility and easy installation.
Raised Face DIN Plate Flanges
Raised face DIN Plate Flanges are characterized by a raised surface around the bolt holes and the inner diameter of the flange. This raised part is usually about 1.6 mm to 7.9 mm high, depending on the flange size and pressure rating.
Seal Performance
One of the main advantages of raised face flanges is their enhanced seal performance. The raised face creates a concentrated sealing force when the flange is tightened, which helps to compress the gasket more effectively. This results in a better seal, especially in high-pressure applications. For instance, in oil and gas pipelines where high pressure and quick response requires tight seals, raised face flanges are often the go-to choice.


Compatibility with Gaskets
Raised face flanges are compatible with a wide range of gaskets. Most commonly, they use ring gaskets that fit into the raised area. This type of gasket provides a good seal and is easy to install. The raised face helps to keep the gasket in place, reducing the risk of gasket slippage during installation or operation.
Applications
Raised face DIN Plate Flanges are commonly used in applications where high pressure and temperature are involved. Industries such as oil and gas, chemical, and power generation often prefer these flanges for their piping systems. They are also used in pipelines that carry corrosive or hazardous fluids, as the better seal provided by the raised face helps to prevent leaks.
Flat Face DIN Plate Flanges
Flat face DIN Plate Flanges, as the name suggests, have a flat surface without any raised portion. The entire surface of the flange is flat.
Seal Performance
Flat face flanges rely on a different sealing mechanism. Since there is no raised face to concentrate the sealing force, the gasket needs to cover the entire flat surface of the flange. The sealing performance of flat face flanges is generally considered to be slightly lower than that of raised face flanges, especially in high-pressure applications. However, in low-pressure and non-critical applications, they can provide a satisfactory seal.
Compatibility with Gaskets
Flat face flanges use full-face gaskets that cover the entire face of the flange. These gaskets are usually made of a soft material, such as rubber or gasket paper. The full-face gasket helps to distribute the sealing force evenly across the flange surface, providing a seal.
Applications
Flat face DIN Plate Flanges are commonly used in low-pressure applications, such as in water supply systems, HVAC systems, and some light industrial applications. They are also preferred in applications where the connection needs to be easily disassembled and reassembled, as the full-face gasket can be removed and replaced more easily compared to the ring gaskets used with raised face flanges.
Key Differences between Raised Face and Flat Face DIN Plate Flanges
Surface Design
The most obvious difference is the surface design. Raised face flanges have a raised area, while flat face flanges have a completely flat surface. This difference in design directly affects the sealing performance and the type of gaskets used.
Sealing Performance
As mentioned earlier, raised face flanges generally offer better sealing performance, especially in high-pressure applications. The raised face concentrates the sealing force, resulting in a tighter seal. Flat face flanges, on the other hand, are more suitable for low-pressure applications where a moderate seal is sufficient.
Gasket Type
Raised face flanges use ring gaskets that fit into the raised area, while flat face flanges use full-face gaskets that cover the entire flange surface. The choice of gasket depends on the flange type and the application requirements.
Application Scope
Raised face flanges are commonly used in high-pressure and high-temperature applications, as well as in applications involving corrosive or hazardous fluids. Flat face flanges are more suitable for low-pressure applications and applications where easy disassembly and reassembly are required.
Choosing the Right Flange for Your Application
When choosing between raised face and flat face DIN Plate Flanges, you need to consider several factors, including the operating pressure and temperature, the type of fluid being carried, and the ease of installation and maintenance.
- Operating Pressure and Temperature: If your application involves high pressure and temperature, raised face flanges are usually a better choice. They can provide a more reliable seal under these conditions.
- Type of Fluid: For corrosive or hazardous fluids, you also need a tight seal to prevent leaks. Raised face flanges are more suitable in this case. However, if the fluid is non-hazardous and the pressure is low, flat face flanges can be used.
- Ease of Installation and Maintenance: If you need to disassemble and reassemble the connection frequently, flat face flanges may be a better option, as the full-face gaskets are easier to remove and replace.
Comparison with ANSI Plate Flanges
It's also worth noting the difference between DIN Plate Flanges and ANSI Plate Flange. ANSI, or the American National Standards Institute, has its own set of standards for plate flanges. While both DIN and ANSI plate flanges serve the same purpose of connecting pipes and equipment, there are some differences in their dimensions, pressure ratings, and design details. For example, ANSI flanges may have different bolt hole patterns and flange thicknesses compared to DIN flanges. When choosing between DIN and ANSI flanges, you need to consider the specific requirements of your project and ensure compatibility with other components in your piping system.
Conclusion
In conclusion, the choice between raised face and flat face DIN Plate Flanges depends on your specific application requirements. Raised face flanges offer better sealing performance in high-pressure applications, while flat face flanges are more suitable for low-pressure and easy-disassembly applications. As a DIN Plate Flange supplier, I can help you make the right choice based on your needs. If you're planning a project that requires these flanges, don't hesitate to reach out for a detailed consultation. Whether you need a small quantity for a DIY project or a large order for an industrial application, we've got you covered. Let's discuss your requirements and find the best solution for your piping system.
References
- DIN Standards for Plate Flanges
- Industry guides on flange selection and application



